Crash-lock bottom shipping box
A corrugated box with regular top flaps and a pre-glued bottom that locks the moment the box is opened.
FEFCO 0711 combines the top of a regular slotted case with a crash-lock bottom glued at the factory. The packer opens the flat box and the bottom forms itself, so there is no taping underneath and set-up takes a second.
It is popular for e-commerce fulfilment and retail-ready shipping where many boxes are packed by hand, and for products that are loaded from the top.
Calibrated. Compared with supplier dielines at more than one size. Allowances are still initial values — order a proof before the first production run.
How it closes
- Top: four ½W flaps, outer pair meeting in the middle, closed with tape.
- Bottom: pre-glued crash-lock that forms as the box opens.
- Side: glue flap.
Good for
- Fast manual packing.
- Top-loaded products.
- Saving tape and time on the bottom.
Watch for
- Needs a gluing step at the factory, so it costs more to convert than an RSC.
- The bottom is designed for the product weight; very heavy loads should be tested.
What you can change
Drawn by the engine at the size shown. Change it in the generator.
Plus fine-tuning values for the locks, flaps and clearances.
Downloads in the generator: DXF, CF2, PDF and SVG. Downloads need a pacxio account: sign in with your email, no password.
How wide the side wings are
How wide this strip is
How round the outer corners are
Ask your agent
Paste this into Claude Code or Codex with pacxio installed.
Make a box with FEFCO 0711, inside size 300 × 200 × 150 mmQuestions
How is 0711 different from 0201?
The tops are the same. The bottom of 0711 is a pre-glued crash-lock that forms by itself; the bottom of 0201 has four flaps that you fold and tape.
Does it still need tape?
Only on top, unless you seal it another way. The bottom needs none.
Which size do I enter?
The inside size, L × W × H in millimetres.