Regular slotted case
The standard corrugated shipping box: four flaps top and bottom, the outer flaps meeting in the middle.
FEFCO 0201, the regular slotted case or RSC, is the box most people picture when they think of a shipping carton. All four flaps at each end have the same depth, half the box width, so the two outer flaps meet exactly in the centre when closed.
It is made from one rectangular sheet with slots and creases only, which is why it is cheap and can be produced on a slotter without a cutting die. It is closed with tape, glue or staples.
Calibrated. Compared with supplier dielines at more than one size. Allowances are still initial values — order a proof before the first production run.
How it closes
- Top and bottom: four ½W flaps; the outer pair meets in the middle.
- The inner flaps don't meet unless the box is square.
- Side: a manufacturer's joint, glued, taped or stitched.
Good for
- Shipping and storage of almost anything.
- Large quantities at the lowest cost.
- Automatic or manual case erecting.
Watch for
- The middle of the top has one layer only; heavy stacking loads need a full-overlap (0203) or stronger board.
- Needs tape or glue to close.
What you can change
Drawn by the engine at the size shown. Change it in the generator.
Plus fine-tuning values for the locks, flaps and clearances.
Downloads in the generator: DXF, CF2, PDF and SVG. Downloads need a pacxio account: sign in with your email, no password.
How much the two flaps overlap
How wide the side wings are
How wide the side wings are
How wide this strip is
How round the outer corners are
Ask your agent
Paste this into Claude Code or Codex with pacxio installed.
Make a box with FEFCO 0201, inside size 300 × 200 × 150 mmQuestions
What does RSC stand for?
Regular slotted case (or container). FEFCO, the European corrugated board federation, gives it the code 0201.
Inside or outside dimensions?
Enter the inside size, L × W × H in millimetres, with L the longer side of the opening. The engine adds the allowances for the flute you pick.
Can I add a tear strip or handle?
Tear-open display and other die-cut options are in the generator, and your agent can add more through pacxio.